Wood Preservative Clear

SPECIFICATION

• Type : Wood preservatives
• Flash Point :  38 oC
• Consistency : Ready for use
• Spreading Rate : 400-450 Sq.ft/ Litre (depends on the wood and wood grain)

DRYING TIME ( at 32 oC )

• Touch Dry – 10 Minutes
• Overcoating – 24 Hours

SURFACE PREPARATION

Clean all surfaces thoroughly before applying. Make sure the substrate is dry.

APPLICATION

1. No thinning is needed.
2. For bare wood, apply with a brush until it stops absorbing.
3. For previously painted wood, strip it down to bare wood, sand it smooth, and then apply.

IMPORTANT

Clean the equipment and brushes with Uniro Mineral Turpentine after use. Ensure good ventilation for drying. Keep containers tightly closed after use and store away from foods, Children & domestic pets. Provide adequate ventilation during and after application.